Malleable Iron Pipe Fittings Factory Tee
- Malleable iron pipe fittings factory Tee is a type of reducer that is used to connect three pipes of different sizes, two of which run in the same direction and one of which runs in a perpendicular direction.
- The most common type of reducing tee is the eccentric reducer, which has a centerline that is offset from the center of the larger pipe
Product Description
- Malleable iron pipe fittings factory Reducing tee, like all pipe tees, is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fitting in which the branch port size is smaller than the ports of the run.
- A reducing coupling is designed to accept pipes into either end. For example, a 15mm to 10mm reducing coupling accepts a 15mm pipe into one end and 10mm pipe into the other. A 15mm to 10mm fitting reducer accepts a 10mm pipe into one end and the other end goes inside a 15mm fitting such as an elbow or coupling or tee.
- YINUO offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet YINUO strict quality standards. All Anvil® Class 300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 psi (6.9 bar).
- Reducing Tee, Series: FIG 1164R, Fitting/Connector Type: Tee, 1x1x1-1/2 in Nominal, NPT, SCH 80/XH, 300 lb., Malleable Iron, Black Oxide, Import
Product Parameter
Please click, If you consider more detailed parameters
